Categories
Contact Us

Shaanxi Jingtian Huawao Industry Development Co.,Ltd

ADD: No.1, 2/F, Building22, Zuoan Resident Community, Gaoxin Road 36, Baoji City, Shaanxi Province, China

TEL: +86 0917 3574578

EMAIL: jthametal@gmail.com

jthametal@163.com

Knowledge
Home > Knowledge > Content
Advantages and disadvantages of band saw cutting titanium alloy rod
Jan 03, 2019

Band saws are used to cut titanium alloy rods with a thickness of 3.2 mm or more. This method does not produce edge cracks, but the disadvantage is that there are burrs, and the burrs must be polished after the blanking.

The band saw machine for sawing titanium alloy rods shall have a rigid structure with sufficient horsepower to maintain a constant speed during sawing; it shall be capable of automatically feeding, tensioning the band saw and providing sufficient coolant. The saw blade should have a certain pitch and width. The sharp edge can be maintained with the usual high speed steel belt spacing and the most constant result is obtained.

  • Newsletter
  • Categories
  • Contact Us

    Shaanxi Jingtian Huawao Industry Development Co.,Ltd

    ADD: No.1, 2/F, Building22, Zuoan Resident Community, Gaoxin Road 36, Baoji City, Shaanxi Province, China

    TEL: +86 0917 3574578

    EMAIL: jthametal@gmail.com

    jthametal@163.com

  • QR Code
  • Copyright © Shaanxi Jingtian Huawao Industry Development Co.,Ltd All Rights Reserved.